|
| EPSON AcuLaser C9200 Series User's Guide | |
|
|
|
|
|
|
|
|
| Paper Handling Problems |
|
|
| Paper does not feed properly |
|
|
|
|
|
|
| Cause | What to do |
|
|
|
|
|
| The paper guides are not set correctly. | Make sure that the paper guides in all the paper cassettes and the |
|
|
| MP tray are set to the correct paper size positions. |
|
|
|
|
|
| The paper source setting may not be correct. | Make sure that you have selected the correct paper source in your |
|
|
| application. |
|
|
|
|
|
| There may be no paper in the paper source. | Load paper into the selected paper source. |
|
|
|
|
|
| The size of loaded paper differs from the control panel | Make sure that the correct paper size and paper source are set in |
|
| or printer driver settings. | the control panel or printer driver. |
|
|
|
|
|
| Too many sheets may be loaded in the MP tray or paper | Make sure that you have not tried to load too many sheets of |
|
| cassettes. | paper. For the maximum paper capacity for each paper source, |
|
|
|
| |
|
|
|
|
| If paper does not feed from the optional paper cassette | For instructions on installing the unit, see “Optional Printer Stand |
|
| unit, the unit may not be installed properly. |
| |
|
|
|
|
| The pickup roller is dirty. | Clean up the pickup roller. For instructions, see “Cleaning the |
|
|
|
| |
|
|
|
|
| The optional paper cassette may not be installed | See “Optional Printer Stand and Paper Cassette Unit” on page 124 |
|
| properly. | for instructions on installing an optional paper cassette unit. |
|
|
|
|
|
To confirm your options are installed correctly, print a configuration status sheet. See “Printing a Configuration Status Sheet” on page 195 for details.
The message Invalid AUX I/F Card appears on the LCD panelCause | What to do |
|
|
The printer cannot recognize the installed optional | Turn off the printer, then remove the card. Make sure the interface |
interface card. | card is of a supported model. |
|
|
Troubleshooting 206