Envelope loading
Envelopes are loaded in much the same way as regular paper. To load envelopes, you need to do the following:
1.Set the paper thickness lever to match the thickness of your envelopes. (For specific information on paper thickness settings, see the section on printing with special paper in Chapter 2.)
2.Follow steps 1 through 5 of the previous section on paper loading to load envelopes. You can load up to 25 plain or bond envelopes, or 30 air mail envelopes.
3.Push down on the two front levers until they lock into position.
Using the cut sheet feeder
After loading paper into the cut sheet feeder, make sure the ON LINE light is on. Once the printer is in the sheet feeder mode, a new sheet of paper loads automatically whenever a printable character or line feed command is sent to the printer.
When the cut sheet feeder runs out of paper, it stops paper feeding and the PAPER OUT light comes on. To start printing again, load more paper
Using Printer Options |