ESC a | Select Justification |
|
|
Format:
ASCII code: ESCn
Decimal: 27 9"7 n
Hexadecimal: 1B 61 n
Comments:
The following values can be used for n:
0:Selects left justification.
1:Selects centering.
2:Selects right justification.
3:Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed when the buffer becomes full. The commands HT and BS are invalid except in n = 0 mode. For n = 3 there must be no carriage returns within a paragraph. This command is available in both draft and
NLQ.ESC SP (space) |
|
| Set Intercharacter Space |
Format: | ESC | SP | n |
ASCII code: | |||
Decimal: | 27 | 32 | n |
Hexadecimal: | 1B | 20 | n |
Comments:
Sets the amount of space added to the right of each character, in addition to the space already allowed in the design of the character. The number of units of space is equal to n, which should be from
0 to 127. Each unit of space is 1/120th of an inch. This command is available in both draft and NLQ.
Command Summary |