You can leave the short tear-off feature turned on (DIP switch 1-5 off) even when you are using single sheets. When you move the paper release lever to the single sheet position, short tear-off is disabled.

Printing on Special Paper

In addition to using single sheets and continuous paper, your printer can also print on a wide variety of paper types, including multi-part forms and labels. You can even feed envelopes, either manually or with the optional cut sheet feeder. Before printing on these special types of paper, however, you need to adjust the paper thickness setting.

The paper thickness lever

To accommodate various thicknesses of paper, the FX printer is equipped with a paper thickness lever that can be set to eight positions. These positions are identified by a scale on the printer frame next to the lever.

Before changing the paper thickness setting, first make sure the power is off and then remove the printer cover.

WARNING: If you’ve been using the printer just before opening the printer cover, be careful not to touch the print

head because it may be hot.

Select the paper thickness you want according to the figure below. For normal use, the lever should always be set to position 2 on the scale.

Paper Handling

2-17