Part of a typical self test in NLQ mode is shown below:

a-()*+,-. /0123456789:;<=>?BABCDEFGHIJKLMNOPQ ‘(I*+,-./0123456’789:;~=~?t@ABCDEFGHIJKLMNOPQR (I*+,-./0123456789:;~=~?@ABCDEFGHIJKLMNOPQRS’

3.To end the self test, press the ON LINE button to take the printer off line. Then press the LOAD/EJECT button to eject the paper, and turn off the printer.

Connecting the Printer to Your Computer

If the self test printed correctly and your printouts looked like the ones shown, you are now ready to connect your printer to the computer.

Your FX printer has a Centronics® -compatible parallel interface. If you have a suitable shielded cable, you should be able to connect your printer immediately. If your computer requires the use of another type of interface, you need to install an optional interface board.

If you are unsure whether your computer has a parallel interface, see your computer’s operating manual. If the computer cannot use a parallel interface, see the section on interface boards in Chapter 7.

Connecting the parallel interface cable

Connect the parallel interface cable as described below:

1. Turn off both the printer and your computer.

1-18

Setting Up the Printer