16.Press the ON LINE button to put the printer on line. Now you are ready to begin printing.

When you are finished printing

The short tear-off function cannot be used with the pull tractor. If you want to tear off the last printed page at its perforation, press the ON LINE button to take the printer off line and press the FORM FEED button to feed the paper forward an additional page before tearing off the paper.

Using the pull tractor alone

If you wish, you can use the pull tractor without using the push tractor. To do this, feed the paper from the rear, above the metal guide, and then load it. Be sure to pull the paper release lever forward to the continuous paper position after you load the paper.

Removing the pull tractor

After turning off the printer and removing the pull tractor cover, remove the pull tractor as follows:

1.Pressing the tabs on the pull tractor, tilt it back and lift it off the printer.

Using Printer Options

7-21