SelecType
The settings you select using the SelecType panel remain valid even after you turn off, reset, or initialize the printer.
FONT
Press this button to select draft, near letter quality Roman, or near letter quality Sans Serif. The indicator light shows which font has been selected.
CHARACTERS PER INCH
Press this button to select the characters per inch (cpi). You can choose 10 CPI, 12 CPI, or PS (proportional spacing). The indicator light shows the selected character spacing.
CONDENSED
Press this button to select either condensed or normal printing. The light is on when the printer is in condensed mode. In this mode, all characters are approximately 60% of their normal width.
Note: Proportional spacing and condensed mode cannot be combined. If you select both, only proportional spacing works.
Using the Printer |