If the platen (black roller) turns but the sheet does not load, remove the sheet completely from the printer. Then make sure the paper release lever is pushed back. Press the paper a bit more firmly into place and try again.

To eject the paper, press the ON LINE button to take the printer off line, and press the LOAD/EJECT button.

Reloading during printing

When you print a document more than one page long using single sheet paper, the printer stops printing when it reaches the bottom of the paper and ejects the page. When this happens, either the ON LINE light goes off automatically or it may remain on, depending on your application software. If the ON LINE light remains on, the first thing you should do is press the ON LINE button to take the printer off line. Once the ON LINE light is off, remove the sheet that has just been printed and load a new sheet as before. Press ON LINE to start printing the next page.

Using Continuous Paper

The tractor built into the FX is remarkably easy to load and operate. Its low-profile design takes up little space and can handle a wide variety of paper widths.

To load continuous paper, follow these steps:

1.Turn off the printer.

2.Pull the paper release lever forward to the continuous paper position.

2-4

Paper Handling