memory
The printer, like a computer, has a memory. When you print a file from a computer, the contents of the file are transferred quickly from the computer’s memory to the printer’s memory. The printer then prints information from its own memory at a much slower rate. This way of printing frees the computer to do other work while the printer is still working. The printer memory is sometimes called the buffer.
A feature that adjusts the paper loading and
number systems
Three number systems are commonly used with printers:
decimal is base 10 and uses the digits 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9. (This is the most familiar system.)
hexadecimal (hex) is base 16 and uses the digits 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. This is frequently used by programmers. Any decimal number between 0 and 255 can be expressed by a
binary is base 2 and uses only the digits 0 and 1. All information in computer systems is handled in binary form to represent electrical signals that are on or off. A binary digit is often called a bit; any decimal number between 0 and 255 can be expressed by an
on line
When the printer is on line, it can communicate with the computer connected to it,
A small switch behind the platen that sends a signal when it is not in contact with paper, causing the PAPER OUT light to go on.
paper tension unit
The part of the printer that fits on top of the platen to ensure proper paper feed tension.
parallel interface
See interface.
Glossary |