Adjusting the Loading PositionThe loading position is the position of the paper when it has been automatically loaded by the printer. This position is important because it determines where the printing begins on the page. If the printing is too high or too low on the page, you need to change the loading position using the micro-adjustment feature described in the next section.
Until the loading position is reset, the printer remembers the position and uses it as a reference point for feeding the paper.
WARNING: If you need to adjust the loading position,
always use the micro-adjustment feature. Never use the platen knob for paper feeding except in case of a paper feeding problem.
Once you have used micro-adjustment to change the loading position of continuous paper, the printer remembers that position even after it is turned off. However, when you use micro-adjustment to change the loading position of single sheet paper, the printer does not remember this position after the power is turned off. When the power is turned back on, the loading position returns to its factory setting.
Using Micro-AdjustmentThe micro-adjustment feature moves the paper 2/216th of an inch at a time to make fine adjustments to the loading or short tear-off positions. Micro-adjustment only works immediately after you load paper or use the short tear-off function. You can use micro-adjustment only when the printer is on line and the ON LINE indicator light is flashing.
After you adjust the tear-off position or after you adjust the loading position for continuous paper, the printer remembers that position even after it is turned off, reset, or initialized. However, when you adjust the loading position for single-sheet paper, the printer does not remember the new position after the power is tuned off.