This table lists the widths of your printer’s proportional characters. The values given are in 120ths of an inch. (For example, a value of 12 is 12/120ths of an inch.) You may need to enter these widths into a special table for your word processing program so it can calculate the number of proportional characters that will fit on a line.
The characters with no code indicated are international characters or graphics. See the table in the section on international character sets in Chapter 3 for the relevant codes for the international characters. Also, see the descriptions of the ESC R and ESC t commands in the Command Summary for information on how to use these characters.
The following width table shows each code (hexadecimal), its character, and its width. If there are two numbers in the width column, the second one is for the italic character.
Code | C H R | Width |
20 |
| 12112 |
21 | ! | 5110 |
22 | II | a/lo |
| ||
23 | # | 12112 |
24 | $ | 12/11 |
25 | % | 12112 |
26 | & | 12112 |
27 | I | 515 |
| ||
28 | I | 618 |
29 |
| 618 |
2A | * | 12/12 |
28 | + | 12112 |
2c |
| 718 |
2D | - | 12/12 |
2E |
| 617 |
2F | i | to/10 |
|
|
|
Code | C H R | Width |
30 | 0 | 12/12 |
31 | 1 | ai9 |
32 | 2 | 12/12 |
33 | 3 | 12112 |
34 | 4 | 12/12 |
35 | 5 | 12/12 |
36 | 6 | 12/11 |
37 | 7 | 12/12 |
38 | 8 | 12112 |
39 | 9 | 12111 |
3A |
| 618 |
38 | , | 619 |
3c | < | lo/lo |
3D | = | 12/11 |
3E | > | 1019 |
3F | ? | 12/11 |
|
|
|