Basic Operations 107
If, in contrast, the feed amount is too large, white bands (pale stripes) will appear; adjust
the feed amount downwards.
3. If you are not satisfied with the results, use the d/u buttons to enter an adjustment
value.
4. Press the Z button when settings are complete.
Once the feed amount has been adjusted, printing will continue at the new value.
Printable area - S70670/S50670
The printable area varies with the position of the media and the pressure rollers used.

Positioning Media of Different Widths

Position the media with reference to the positions of the pressure rollers.
The positions of the pressure rollers are indicated by the black labels that are visible when
the front cover is open and by the holes on the back of the printer. There are ten positions
in total. In the following guides for loading media, the label on the extreme right facing the
printer from the front is Label 1, the leftmost label Label 10.
Note:
The new value is erased when:
❏The media loading lever is raised
❏The printer is turned off
❏Changes are made to Feed Adjustment in the Media Setup menu.