Basic Operations 108
* Ink layering not available with media of this width. See “High Print Quality” on page 27.
Using the High Pressure Rollers
Position the high pressure rollers within 10 mm (0.4 inch) of the edges of the media inside
any of the black labels from 1 to 10 in the “Positioning Media of Different Widths”
illustration. The gray area in the illustration below shows the printable area. The arrow
indicates the feed direction.
Note:
Pressure rollers not within the bounds indicated by the black labels do not apply pressure to
the media when the media loading lever is lowered. Pressure rollers that are within a black
label but not over the media will cause friction during printing; be sure to position rollers that
are not over the media outside the black labels.