Introduction 23
3Media info
From left to right, this display shows the selected media, platen gap, media width, and media remaining.
If a media setting bank number created with this printer is selected as the print media, the number (from 1 to 30) will be
displayed. When RIP Settings is selected, 0 will be displayed.
The selected platen gap is shown as follows.
:1.5
:2.0
:2.5
The media remaining is not displayed if Off is selected for Remaining Setup in the Media Remaining menu.
See “The Media Setup Menu” on page 152.
4Ink cartridge status
Displays the approximate level of remaining ink and the current status. When ink runs low or an error occurs, the display
changes as shown below.
Normal Warning or error
1 Status indicators
The ink cartridge status is indicated as follows.
:Ready to print. The height of the indicator changes with the level of ink remaining.
:Ink is low. You need to prepare a new ink cartridge.
:The level of ink remaining has reached the limit; replace with a new cartridge.
:The ink cartridge is not locked. Lower the lock lever to engage the lock.
:No ink cartridge is inserted. Insert the ink cartridge and lower the lock lever to engage the lock.
:An error occurred. Check the message on the screen, and clear the error.
:A cleaning cartridge is installed. The height of the indicator shows the amount of cleaning liquid
remaining in the cartridge in three levels.
1
2