Maintenance 128
Cleaning Wiper and Caps
The S70670 and S50670 have two wipers and ten caps.
1. Clean the front and back of the wiper with a cleaning stick.
If the attachment points do not require cleaning, clean the wiper as shown below and
proceed to Step 7. If there is ink on the attachment points, remove the wiper for
cleaning. Proceed to Step 2.
Important:
Be sure not to touch the nozzle surface during cleaning. Failure to observe this
precaution could damage the print head.
The parts shown below are sensors. Be careful not to touch this area with your hands
or clean room wipes. Failure to observe this precaution could affect print quality.