Epson S30670, S50670, S70670 Attaching the Roll Core

Basic Operations 83
Attaching the Roll Core
1. After confirming that the media is loaded correctly, press the d button to feed the media
as far as the auto take-up reel unit roll core holder.
2. Loosen the roll core holder fixing screws and adjust the roll core holders so that the gap
between the two is wider than the media.
cCaution:
Be sure that your hands or hair do not get caught in the auto take-up reel unit while it is in
operation.
Failure to observe this precaution could result in injury.
Follow the instructions in the manual when loading media or roll cores or removing media
from the take-up roll.
Dropping media, roll cores, or take-up rolls could result in injury.
Important:
Note that the auto take-up reel unit may not function as expected when ink layering is performed
with the S70670 or S50670, causing a decline in print quality. See “High Print Quality” on page
27.