Basic Operations 67
First, position the plates so that the edges of the media are in the centers of the round
holes. Next, adjust the position so that the white line is visible in the square window and
push the plates down to lock them in place and keep them from lifting.
Important:
Do not use the media holding plates with media that is more than 0.4 mm (0.02 inch)
thick. The media holding plates could touch and damage the print head.
Move the media holding plates to the left and right edges of the platen when they are
not in use.
Do not use the media holding plates if the sides of the printed media are smudged or
torn.
Leave left and right margins of over 10 mm (0.39 inch) when using the media holding
plates. Narrower margins could result in printing over the plates.