Maintenance 120
Auto Maintenance Options
The printer features handy auto maintenance options for performing regular head cleaning
at an interval selected as described below.
❏Periodical Cleaning
Head cleaning is performed automatically at selected intervals of 1 to 240 hours. See
“Printer Setup Menu” on page 156.
❏Cleaning Cycle
Head cleaning is performed automatically at selected intervals of 1 to 10 pages. See
“Printer Setup Menu” on page 156.
This section explains how to clean the head if you find that the nozzles are clogged on
printing a test pattern.
1. Press the # button when the printer is ready to display the Maintenance menu.
Pressing the # button when printing is paused takes you to Step 3.
2. Use the d/u buttons to select Cleaning and press the Z button.
Note:
If colors are faint or missing even after head cleaning, perform regular part cleaning. See
“Regular Part Cleaning” on page 124.