Basic Operations 91
6. Loosen the right roll core holder fixing screw and remove the roll core holder from the
roll.
7. Lower the roll onto the roll support.
Before Printing
To maintain print quality, perform the following inspection before starting work each day.
Check the amount of ink remaining.
If ink is expended during printing, printing can be resumed once the affected cartridge
has been replaced. Note, however, that depending on how much the ink has dried,
replacing ink during printing may cause apparent changes in hue. If you know that the
print job will be a large one, we recommend that you use new cartridges to replace
those that are running low before you start. The old cartridges can be reinserted and
used at a later date.
Ink level is shown by an icon. See “Understanding the Display” on page 22.
If you need to replace cartridges, see “How to replace” on page 143.
Agitate white and metallic silver inks.