Introduction 22
Understanding the Display

The following illustration shows the display for the S50670.

12 W button (pause/cancel button)
The printer enters pause status if this is pressed while printing. To release the pause status, press the W button again, or
select Pause Cancel on the screen and then press the Z button. To cancel print jobs being processed, select Job Cancel on
the screen and then press the Z button.
Pressing this button when menus are displayed closes the menus and returns the printer to ready status.
13 button (media feed button)
When the printer is in the ready state, you can feed the media to the cut position by pressing this button and then Z.
See “Cutting Media” on page 80.
When printing is in progress, you can use this button to adjust media feed.
See “Feed Adjustment (Manual Feed Adjustment)” on page 103.
1Messages
Displays the printer's status, operation, and error messages.
See “When a Message is Displayed” on page 164.
2 Heater temperature
From left to right, this display shows the temperature settings for the pre-heater, platen heater, and after heater. The
thermometer icons give a rough indication of the current temperatures of the heaters.
: The heater has reached the selected temperature.
: The heater has not reached the selected temperature.