Using the Control Panel Menu 148
Menu Item Parameter
Media Setup
See “The Media Setup
Menu” on page 152.
Media Remaining
Remaining Setup On, Off
Length 5.0 to 99.5 m (15 to 300 ft)
Remaining Alert 1 to 15 m (4 to 50 ft)
Print Remaining Length Print
Select Media RIP Settings, 1 to 30 (media setting bank number)
Customize Settings
Current Settings Change settings for currently selected media. The options
available depend on whether RIP Settings or a media setting
bank is selected. The options available for RIP settings and
media setting banks 1 to 30 are listed below.
RIP Settings
Platen Gap 1.5, 2.0, 2.5
Head Alignment
Input thickness. Auto(Uni-D), Auto(Bi-D), Auto(Dual Head)1, Manual(Uni-D),
Manual(Bi-D), Manual (Dual Head)1
Roll Type Printable Side Out, Printable Side In
Tension Measurement Periodically, Every Page, Off
Media Tension 0 to 40
1 to 30 (media setting bank)
Setting Name Up to 22 half-size characters
Feed Adjustment Auto, Manual
Platen Gap 1.5, 2.0, 2.5
Head Alignment Auto(Uni-D), Auto(Bi-D), Auto(Dual Head)1, Manual(Uni-D),
Manual(Bi-D), Manual (Dual Head)1
Heating & Drying
Heater Temperature Pre-heater/platen heater: 30°C to 50 °C (86 °F to 122 °F)
After heater: 30°C to 55 °C (86 °F to 131 °F)
Drying Time Per Pass 0 to 10 sec
After Heater Feed Mode 1, Mode 2, Off
Additional Dryer On, Off