Epson S30670, S50670, S70670 - page 11

Introduction 11
6 Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two lift levers:
one on the left and one on the right.
7 Roll support
Place the used roll core for media take-up on these holders. There are two supports: one on the left and one on the right.
8Auto switch
Use this switch to select the auto take-up direction. Choose Off to disable auto take-up.
9Manual switch
Use this switch to select the manual take-up direction.AutoThe selected option takes effect when the Auto switch is in the Off
position.
10 Casters
There are two casters on each leg. Once installation is complete, the front casters should be kept locked while the printer is in
use.
11 Airflow vents
These vents vent air from inside the printer. Do not obstruct these vents.
12 Waste ink bottle holder
Place the waste ink bottle in this holder.
13 Adjuster
The adjusters keep the printer in place. After installing the printer, keep it securely in place during use.
14 Waste ink bottle
Waste ink collects in this bottle.
Replace with a new waste ink bottle when the level approaches the line.
15 Waste ink tube
Waste ink is discharged from this tube. Be sure the end of this tube is in the waste ink bottle while the printer is in use.
16 Ink cartridge/replacement cartridge
The number of each type of cartridge installed varies with the option selected for color mode.
S70670: 8 colors/10 colors
S50670: 4 colors/5 colors
In 8 or 4 color mode, you need to use “replacement cartridges” to fill all slots. These are included with your printer.
17 Lock levers
Raise the levers to unlock the ink cartridges prior to removal. Lower the levers to lock the cartridges in place after insertion.
18 Cartridge check lamp
This lamp lights when an ink cartridge error occurs.
On : An error occurred. Check the contents of the error on the control panel's screen.
Off : No error.
19 AC inlet #1/AC inlet #2
Connects the power cable. Be sure to connect both cables.
20 LAN port
See “LAN port” on page 19.