Basic Operations 82

Removing Media

You can now remove the media from the roll holders. To remove the media, reverse the
steps you followed to load it.
Using the Auto Take-up Reel Unit

Media Loading and Take Up

The auto take-up reel unit automatically takes up media as it is printed, improving the
efficiency of unmanned operation.
The auto take-up reel unit for this printer can take up media in either of the following
directions.
Counterclockwise take up places the printed surface on the outside of the roll.
Clockwise take up places the printed surface on the inside of the roll.
The explanation that follows uses the supplied auto take-up reel unit for illustrative
purposes, but the same procedure can be followed when using the optional auto take-up
reel unit for heavy media.
Note:
If you are using the auto take-up reel unit, set the Auto switch on the auto take-up reel unit to Off
before using the Manual switch to position the media over the cutting groove.
If you are using the S70670 or S50670 and do not intend to make additional prints, raise the
media loading lever to prevent deformation of the pressure rollers.
Counterclockwise Clockwise