Maintenance 141

Cleaning Check Sheet

Print these pages to track maintenance tasks.

Component to be
cleaned
Cleaned on date Explanation
1 Platen heater,
pressure rollers,
media holding plates
/////Clean if you notice lint from print media, dust,
or ink stains.
/////
/////
/////
2 Print head /////We recommend that cleaning be performed
once a week.
Cleaning should also be performed if colors in
the printout are faint or missing even after
head cleaning has been performed.
Complete the task within 10 minutes to
prevent the print head drying out.
Be sure to use a narrow cleaning stick to clean
between the nozzles (the four areas shown in
Figure 2). Touching the nozzle surface with the
cleaning stick could damage the print head.
Use consumable ink cleaner (T699300) for
stains that cannot otherwise be removed.
/////
/////
/////
3 Wiper /////
/////
/////
4 Caps /////
/////
/////
/////
5 Wiper rail /////
/////
/////
/////