Appendix 179
6. Move the printer.

Post-Move Setup

After moving the printer, follow the steps below to ready it for use.
1. Check that the new location is appropriate.
See the Setup Guide.
2. Plug in the power cables and turn the printer on.
See the Setup Guide.
3. Perform a nozzle check to check for clogged nozzles. See “Checking for clogged
nozzles” on page 114.
4. Perform Head Alignment and check print quality. See “Head Alignment” on page 96.

Transport

Before transporting the printer, contact EPSON Support.
System Requirements
Consult the documentation for your software RIP.
Important:
Use the casters on the dedicated printer stand to move the printer indoors a short distance
over a level floor. They can not be used for transport.