Epson TM-H5000/H5000P manual ESC n, ESC 3 n

(For slip paper)

		Number of	Horizontal Direction
m	Mode	Bits for			Number of Data
		Vertical	Dot	Number	(K)
		Data	Adjacency	of Dots
0	8-dot single-density	8	Available	400	nL + nH × 256
1	8-dot double-density	8	Not available	800	nL + nH × 256

•The nL and nH indicate the number of dots of the bit image in

the horizontal direction. The number of dots is calculated by nL + nH × 256.

•If the bit-image data input exceeds the number of dots to be printed on a line, the excess data is ignored.

•d indicates the bit-image data. Set a corresponding bit to 1 to print a dot or to 0 to not print a dot.

ESC - n

[Name]	Turn underline mode on/off
[Format]	ASCII	ESC	-	n
	Hex	1B	2D	n
	Decimal	27	45	n
[Range]	0 ≤n ≤ 2, 48 ≤ n ≤ 50
[Description]	Turns underline mode on or off, based on the following values of n:
n	Function
0, 48	Turns off underline mode
1, 49	Turns on underline mode (1-dot thick)
2, 50	Turns on underline mode (2-dots thick)

•If slip paper is selected, the underline is printed with 1-dot thickness even if n is specified as 2 or 50.

ESC 2

[Name]	Select default line spacing
[Format]	ASCII	ESC	2
	Hex	1B	32
	Decimal	27	50
[Description]	Sets the line spacing to 1/6 inch.

ESC 3 n

[Name] Set line spacing

Commands 5-7