Epson TM-H5000/H5000P Parallel interface specification, 4Dip Switch and Paper Near End Settings

Parallel interface specification

Set 1

SW	Function	ON	OFF
1-1	Auto line feed	Always enabled	Always disabled
1-2	Receive buffer capacity	45 bytes	4K bytes
1-3 ~	Undefined	—	—
1-8

Set 2

SW	Function	ON	OFF
	Handshaking (BUSY	•Receive buffer full	•Off-line
2-1			•Receive buffer full
	condition)	•Reading data
			•Reading data
2-2	Reserved	Fixed to Off
	(Do not change settings)
2-3	Selects print density	Refer to table below
2-4
2-5 ~	Reserved	Fixed to Off
2-7	(Do not change settings)
2-8	I/F pin 31 reset signal	Fixed to On
	(Do not change settings)

A-4Dip Switch and Paper Near End Settings