INSTALLATION
CONVERSION KIT#
FOR
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Each Kit contains one LPG Conversion Kit and one DC Sparker Kit.
LPG Conversion Kit Contains:
Qty. | Part # | Description |
1
1
1
1
1
1
DC Sparker Kit Contains:
Qty. | Part # | Description |
8) | Unscrew the pilot orifi ce with the allen key |
| and replace with the LP pilot orifi ce in the |
Remove | kit and replace pilot cap. |
screw |
|
Allen Key
1
1
1
1
1
1
0.500 in.
1
2
Black Oxide
1
1
1
Energizer En91
6)Remove the 2 screws, one on each side of the burner. Slide the burner to the left and then lift out.
Remove screw
9)Remove burner orifi ce with a 1/2" wrench and discard. Use another wrench to hold on to the elbow behind the orifi ce.
Burner
Orifi ce
10)Reinstall new burner orifi ce LP stamped #49 and tighten.
2
1
Slide the burner to | 11) Remove the black protection cap by |
the left and lift out. | hand from the |
Installation of LPG
Conversion Kit:
1)Turn the gas off.
2)Turn control knob to the “OFF” position.
3)Remove the glass frame.
4)Removethelogs,embers,andbrickpanels (if used).
5)Remove the burner/grate assembly, fi rst by removing the two screws, one on each side of the grate, then pull out the grate.
7)Pull off the pilot cap to expose the pilot orifi ce.
Fig. 1
24 | Excalibur® |
