•Windows 7 and later: A
Figure 9. Driver Software Installation Window for USB Software
3.(Windows XP and earlier) Click Next. On the next screen, make sure that the Install the software automatically (Recommended) radio button is selected, then click
Next (you do not need to insert a disc).
Figure 10. Selecting the Radio Button to Install the USB Driver Automatically
Your computer locates the driver needed for it to communicate with the DSC via the USB port.
4.Windows XP or earlier: When the Completed screen appears, click Finish to close the wizard.
Windows 7 or later: When the USB software has been located and downloaded, the message Ready to use appears on the Driver Software Installation screen (a
5.Configure the DSC as desired, using SIS commands (see SIS Commands on page 41), the OSD (see
DSC | 10 |