Extron electronic DSC 3G-HD A, DSC HD-3G A manual Symbol Definitions

Symbol Definitions

•= Space

] = Carriage return with line feed

}or ¦ = Carriage return with no line feed E or W = Escape

24= Superscripts indicate the error message displayed if the command is entered incorrectly or with invalid parameters (see Error Responses on page 42).

*NOTE: Values with an asterisk (*) depend on the resolution.

X@	= Input video format for DSC 3G-HD A:
		0		= No signal detected on the current input
		1		= SD – 480i
		2		= SD – 576i
		3		= HD – 480p, 576p, 720p, 1080i, 1080p (up to 30 Hz)
		4		= 3G – 1080p (@ 50, 59.94, and 60 Hz), 2k
		5		= Unknown
X#	= Input video format for DSC HD-3G A:
		0		= No signal detected on the current input
		1		= HDMI
		2		= DVI
		3		= Invalid signal
X$	= Horizontal or vertical start — 0 through 255 (default midpoint = 128)
			Response is 3 digits, padded with zeros.
X^	=	Total lines:*
			DSC 3G-HD A: View only
			DSC HD-3G A: ±512 of the default value
			Response is 4 digits, padded with zeros.
X&	=		Total pixels:*
			DSC 3G-HD A: View only
			DSC HD-3G A: ±512 of the default value
			Response is 4 digits, padded with zeros.
X*	=	Active pixels:*
			DSC 3G-HD A: View only
			DSC HD-3G A: ±512 of the default value
			Response is 4 digits, padded with zeros.
X(	=	Active lines:*
			DSC 3G-HD A: View only
			DSC HD-3G A: ±256 of the default value
			Response is 4 digits, padded with zeros.
X1)	= On or off (enable or disable)
		0		= Off or disable
		1		= On or enable
X1@	= Internal temperature (in degrees Celsius)
			Response is 2 digits, padded with a zero.
X1#	= Horizontal and vertical frequencies
			Format is 3 digits with a single decimal place and leading zeros. (Example: 075.3)
X1$	= Text label or preset name (up to 16 characters)
			NOTE: User and input presets saved without a name are given the default names
				“User Preset nn” (for example, User Preset 11) or Input Preset nnn (for
				example, Input Preset 005).

DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 43