From this menu, you can configure the following:
•
•Input EDID — (DSC
•Output Resolution — This option lets you set the resolution and refresh rate for the current output. The DSC
•Auto Memory — Select this option to enable or disable Auto Memories. When you select On, the DSC automatically stores the current input configuration and picture control values as an input preset in one of its 32 Auto Memory locations (see Auto Memories on page 38 for more information).
•Aspect Ratio — This option lets you specify how much of the display the image will fill. The
•Input Audio Format — This option enables you to select the format of the audio (if any) that will be embedded in the output (see the audio formats table on page 30 for more information). Selecting None mutes the audio.
•Test Pattern — This option lets you choose a test pattern to aid in setting up the DSC and the corresponding output display. Available patterns are: Off (no test pattern), Crop, Alternating Pixels, Crosshatch, Color Bars, Grayscale, Blue Mode, and Audio Test (displays a crop pattern with OSD text AUDIO TEST and outputs 48 kHz, 24 bit pink noise).
User Presets submenu
This submenu (shown in figure 16 on the next page) allows you to save positioning and sizing information and picture adjustments as a User preset. You can recall saved presets, easily applying their settings to frequently used sources. Presets can also be overwritten or cleared via this menu. (The User Presets submenu is the same on both DSC models.)
•Up to three user presets per input can be saved or recalled.
•A user preset can be saved with one input resolution and later recalled with another resolution. For example, you could save a preset at 720p and recall it at 1080p.
DSC | 19 |