Extron electronic DSC HD-3G A, DSC 3G-HD A manual X2@, X2%, X3@, X3#, X3$

X2@	=	Test patterns:
		0	= Off (default)
		1	= Crop
		2	= Alternating pixels
		3	= Crosshatch
		4	= Color bars
		5	= Grayscale
		6	= Blue mode (no crop pattern)
		7	= Audio Test (Crop pattern, OSD text Audio Test. Outputs pink noise at 48 kHz,
			24 bits, channels 1/2.)
X2%	= User presets — 1 to 3
		Response is 2 digits padded with a zero.
X2^	= Input presets — 1 to 128 (global for device)
		Response is 3 digits padded with a zero.
X2*	= Output sync timeout — 1 to 500 in 1-second increments
		0	= The output sync is instantly disabled with no active input.
		501 = The output sync never times out (default).
X2(	= Front panel lock (executive mode) status
		0	= Disabled (default)
		1	= Enabled (front panel locked)
X3)	= OSD menu system status
		0	= Off
		1	= On
X3!	=	Verbose mode
		0	= None
		1	= Verbose mode (default)
		2	= Tagged response for queries
		3	= Verbose mode and tagged response for queries
	NOTE: If tagged responses are enabled, all view commands return the constant string
			plus the data. For example:
			Command: E M SSAV }
			Response: SsavM X4) ] (verbose mode)
			or X4) ] (non-verbose mode)
X3@	= Unit name — A text string of up to 24 characters (A-Z, 0-9, and the hyphen (-) are
		permitted.
		The first character must be a letter.
		The last character cannot be a hyphen.
		No blank or space characters are permitted as part of the name.
		No distinction is made between uppercase and lowercase letters.
X3#	=	Default name — DSC 3G-HD A or DSC HD-3G A
X3$	=	Model description — Digital Scaling Converter
X3&	= Overscan — DSC 3G-HD A
		Applied only to SMPTE input rates (480i, 576i, 720p, 1080i, 1080p, and 2k)
		0	= 0.0% — A true Auto-Image is executed on SMPTE inputs (default for SDI).
		1	= 2.5% — An Auto-Image command snaps to a 2.5% table (no true Auto-Image is
			performed).
		2	= 5.0% — An Auto-Image command snaps to a 5.0% table (no true Auto-Image is
			performed).
X3*	= Overscan — DSC HD-3G A
		Applied only to SMPTE input rates (480i, 576i, 1080p @ 50 and 60 Hz, and 2k)
		0	= 0.0% — A true Auto-Image is executed on SMPTE inputs (default for HDMI and DVI).
		1	= 2.5% — Auto-Image commands snap to a 2.5% table (no true Auto-Image is
			performed).
		2	= 5.0% — Auto-Image commands snap to a 5.0% table (no true Auto-Image is
			performed).
			DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control	46