Extron electronic DSC HD-3G A, DSC 3G-HD A To select a resolution and rate for input emulation

•Input EDID — (DSC HD-3G A only) This option lets you select an EDID (resolution and refresh rate) emulation for the HDMI input. You can match the input EDID to the output rate or set a discrete EDID. The default is 720P @ 59.94 Hz. The table below shows the available EDID selections.

Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz

30 Hz 50 Hz 59.94 Hz 60 Hz

C1: nnnnXnnnn @nnHz	Custom EDID 1
C2: nnnnXnnnn @nnHz	Custom EDID 2
C3: nnnnXnnnn @nnHz	Custom EDID 3
640 x 480								X
800 x 600								X
852 x 480								X
1024 x 768								X
1024 x 852								X
1024 x 1024								X
1280 x 768								X
1280 x 800								X
1280 x 1024								X
1360 x 765								X
1360 x 768								X
1365 x 768								X
1366 x 768								X
1440 x 900								X
1400 x 1050								X
1600 x 900								X
1680 x 1050								X
1600 x 1200								X
1920 x 1200								X
480i (PAL)							X
576i (NTSC)						X
480p							X	X
576p						X
720p*			X	X	X	X	X*	X
1080i						X	X	X
1080p	X	X	X	X	X	X	X	X
2k (2048 x 1080)	X	X	X	X	X	X	X	X

*Default resolution and rate

Selecting an input EDID

To select a resolution and rate for input emulation:

1.From the Input menu, select Input EDID.

2.Press the  or  button to select a resolution.

3.Press the  or  button to select a rate for the resolution.

4.When finished, press Menu to return to the Input submenu or wait for the DSC to time out (approximately 1 minute). Your selections are saved and appear next time you open the OSD.

DSC 3G-HD A and DSC HD-3G A • Operation 24