Using the Front Panel Buttons with the OSD Menus
The front panel navigation buttons enable you to access the OSD and make selections from its menus.
•Menu — Press this button to open and close the OSD. Pressing it from within a submenu or a submenu option returns you to the next higher menu level.
For example, if you select and highlight a submenu option you did not want, pressing Menu changes the highlighting of the option to an outline. From there, you can use the up and down arrow buttons to move the outline to the desired option.
•Enter — Press this button to access the options on the displayed submenu (moves a yellow outline to the first submenu option in the right column). Press this button again to select the outlined submenu option. (You can also use the Enter button to open the OSD, but not to close it.)
•Left arrow — Press this button to adjust settings on screens displayed as a result of selecting submenu options. For Picture Controls submenu options with
(for example, Brightness and Contrast or H and V) press this button to select the
•Right arrow — Press this button adjust settings on screens displayed as a result
of selecting submenu options. For Picture Controls submenu options, press this button to select the
When the OSD is closed, pressing this button performs an
•Up arrow — Press this button to move upward through main menu and submenu options. This button also adjusts settings on screens displayed as a result of selecting submenu options.
•Down arrow — Press this button to move downward through main menu and submenu options. This button also adjusts settings on screens displayed as a result of selecting submenu options.
You can also use this button to reset the output rate (see Resetting the Output Rate on page 37 and in conjunction with the Menu button to lock the front panel (see Locking the Front Panel (Executive Mode) on page 40).
DSC | 16 |
