X6) | = EDID file data block, 128 or 256 bytes of binary data | ||
X6! | = | Video signal status | |
|
| 0 | = Video (DSC |
|
| 1 | = Video or TMDS signal detected. |
X6@ | = Power Save mode | ||
|
| 0 | = Full power mode (default) |
|
| 1 | = Low power mode |
X6# | = | Screen saver status | |
|
| 0 | = Active input detected, timer not running |
|
| 1 | = No active input detected, timer running, output sync active |
|
| 2 | = No active input detected, timer expired, output sync disabled |
X6$ | = Input lock (AFL) — DSC | ||
|
| 0 | = Disable input lock. Free running pixel clock is generated internally. (Default) |
|
| 1 | = Enable input lock. Locks output vertical to vertical refresh rate of the selected input. |
X6% | = Input lock (AFL) status — DSC | ||
|
| 0 | = Input lock (AFL) is disabled. |
|
| 1 | = Input lock (AFL) is enabled, but cannot lock to applied input signal. The DSC |
|
|
| defaults to the set output rate. |
|
| 2 | = Input lock (AFL) is enabled. The output is locked to the applied input signal (AFL). |
X6^ | = Input lock (AFL) / SDI Genlock — DSC | ||
|
| 0 | = Disable input lock/genlock. Free running pixel clock is generated internally. (Default) |
|
| 1 | = Enable input lock (AFL). Locks the output vertical to the vertical refresh rate of the |
|
|
| selected input. |
|
| 2 | = Enable SDI genlock. Locks output vertical to selected genlock input. |
X6& | = Input lock (AFL) / genlock status — DSC | ||
|
| 0 | = Input lock (AFL) / SDI genlock is disabled. |
|
| 1 | = Input lock (AFL) is enabled, but cannot lock to the applied input signal. The |
|
|
| DSC |
|
| 2 | = Input lock (AFL) /SDI genlock is enabled. The output is locked to the applied input |
|
|
| signal (AFL). |
DSC | 48 |