Extron electronic DSC HD-3G A manual E 2 * X2 , X1$ PNAM, E X2 RATE, Presets continued, Command

Command	ASCII Command	Response	Additional Description
	(Host to Scaler)	(Scaler to Host)
Presets (continued)
Input Presets
Recall preset	2 * X2^ .	2 Rpr X2^ ]	Recall input preset X2^ for
			selected input.
Save preset	2 * X2^ ,	2 Spr X2^ ]	Save input preset X2^ for
			selected input.
Delete/clear preset	E X 2 * X2^ PRST }	Prst X 2 * X2^ ]	Clear input preset X2^ and set
			its name to [unassigned].

Input Preset Name

Write name E 2 * X2^ , X1$ PNAM }

Pnam 2 *X2^ , X1$]

Read name	E 2 * X2^ PNAM }	X1$ ]
		In verbose modes 2 and 3:
		Pnam 1 * X2% , X1$ ]

Set the name of input preset X2^ to X1$.

View the name of input preset X2^.

NOTE: Unnamed presets are shown as [unassigned]. To restore a default input preset name, enter a single space character for X1$. These entries are valid only for previously saved presets.

Output Configuration

Output EDID (DSC 3G-HD A only)

Save output EDID	E S 1 X2! EDID }	Edid S 1 * X2! ]	Save the EDID of the current
			DSC 3G-HD A output to X2!.
Output Scaler Rate
Set output rate	E X2) RATE }	Rate X2) ]	Select the DSC 3G-HD A
			output resolution and refresh
			rate.
View output rate	E RATE }	X2) ]	Show selected output rate.
		Rate X2) ]

NOTE: X1$ = Preset name, up to 16 characters

X2) = Output resolution and refresh rate:

•DSC 3G-HD A: 1 – 92.

1 = EDID of connected HDMI display, 2 = Custom rate 1, 3 = Custom rate 2, 4 = Custom rate 3,

9 = Match the input rate (if the current input is not a valid output rate, defaults to 720p @ 60 Hz [73]). For variables 11-92, see the DSC 3G-HD A variables table on page 44.

•DSC HD-3G A: 0 – 96.

0 = Automatic: matches current output resolution (default), 1 = Custom rate 1, 2 = Custom rate 2, 3 = Custom rate 3, 9 = Match the input rate.

For variables 65-96, see the DSC HD-3G A variables table on page 45.

Response is 2 digits padded with a zero.

X2! = EDID emulations: 0 = Automatic: matches current output resolution (default),

1 = Custom EDID 1, 2 = Custom EDID 2, 3 = Custom EDID 3, 9 = Match the input rate. For variables 11-96, see the SIS EDID table on page 45.

Response is 2 digits padded with a zero.

X2^ = Input preset number: 1 – 128. Response is 2 digits padded with a zero.

DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 54