Extron electronic DSC 3G-HD A manual X3& =, Advanced Configuration continued, Input Aspect Ratio

Command	ASCII Command	Response	Additional Description
	(Host to Scaler)	(Scaler to Host)
Advanced Configuration (continued)
Input Aspect Ratio
Enable Fill mode	E 1 * 1 ASPR }	Aspr 1 * 1 ]	Set the input to always fill the
			entire output raster (default).
Enable Follow mode	E 1 * 2 ASPR }	Aspr 1 * 2 ]	Set the input to preserve its
			native aspect.
View aspect setting	E 1 ASPR }	X3( ]	View input aspect ratio X3(.
		In verbose modes 2 and 3:
		Aspr 1 * X3( ]
Front Panel Lock (Executive Mode)
Enable lock mode	1 X	Exe 1 ]	Lock the entire front panel.
Disable lock mode	0 X	Exe 0 ]	Unlock front panel controls. All
			front panel adjustments can be
			made.
View lock mode status	X	X2( ]	View current lock mode status
		In verbose modes 2 and 3:	X2(.

Exec X2( ]

Overscan Mode — DSC 3G-HD A

(Applies only to SMPTE input rates: 480i, 576i, 720p, 1080i, 1080p, and 2k.)

Set value		E 1 * X3& OSCN }	Oscn 1 * X3& ]	Set the SDI input to overscan
				mode X3&.
View status		E 1 OSCN }	X3& ]	Show overscan mode status
			In verbose modes 2 and 3:	X3& for the SDI input.
			Oscn 1 * X3& ]
Overscan Mode — DSC HD-3G A
(Applies only to SMPTE input rates: 480i, 576i, 1080p @ 50 Hz and 60 Hz, and 2k.)
Set value		E 1 * X3* OSCN }	Oscn 1 * X3* ]	Set the HDMI input to overscan
				mode X3*.
View status		E 1 OSCN }	X3* ]	Show overscan mode status
			In verbose modes 2 and 3:	X3* for the HDMI input.
			Oscn 1 * X3* ]
Video Signal Presence
View signal presence		E 0LS }	X6! ]	View input signal status X6!.
			In verbose modes 2 and 3:
			In00 • X6! ]
NOTE: X2( =	Front panel lock mode (executive mode):
X3& =	0 = Unlock front panel (default), 1 = Lock front panel
	Overscan — DSC 3G-HD A:

0= 0.0% — A true Auto-Image is executed on SMPTE inputs (default for SDI).

1= 2.5% — An Auto-Image command snaps to a 2.5% table (no true Auto-Image is performed).

2= 5% — An Auto-Image command snaps to a 5% table (no true Auto-Image is performed).

X3* = Overscan — DSC 3G-HD A:

0= 0.0% — A true Auto-Image is executed on SMPTE inputs (default for HDMI and DVI).

1= 2.5% — An Auto-Image command snaps to a 2.5% table (no true Auto-Image is performed).

2= 5% — An Auto-Image command snaps to a 5% table (no true Auto-Image is performed). X3( = Aspect ratio:

1= Fill: The input rate fills the entire output raster (default).

2= Follow: The input rate is displayed with its native aspect ratio. X6! = View video signal status:

0= No input signal detected, 1 = Input signal detected

DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 59