Changing the Output Resolution and Refresh Rate
In addition to the Output submenus (see pages 25 and 27), other options for setting the output resolution and refresh rate include resetting the output rate using the front panel button (see Resetting the Output Rate on page 37), SIS commands (see the Output Configuration commands beginning on page 54, and the
Custom Rates — DSC 3G-HD A Only
In addition to the 42 factory output resolutions, 3 custom
Importing an HDMI EDID — DSC 3G-HD A Only
You can also import the EDID of a connected HDMI sink to use as a custom rate. This EDID can be saved and stored in one of three custom EDID slots, which are then available for custom EDID emulation or custom output rate generation (custom rate based on the EDIDs preferred timings) (see the Output EDID command on page 54).
NOTE: If an imported or custom rate is not a valid output resolution, the output reverts to the default (720p @ 60 Hz).
Changing the Output Resolution from the Front Panel — DSC
Depending on which Output LED is lit (2.97 Gbps for
To change the resolution using the front panel buttons:
1.With the scaler powered on, press and hold the Menu and
Press Enter to confirm the new resolution. Unit will return to previous resolution in 15 seconds if not confirmed.
2.Press the or button repeatedly to cycle through the output resolutions typically associated with the
NOTE: If you do not press a button within 15 seconds, the DSC reverts to the previous output rate and you must return to step 1 if you want to select another resolution.
DSC | 36 |