Extron electronic HVA, 1616 HV manual 17 +8dB displayed, CrossPoint Plus 168

Operation, cont’d

Figure 3-16 and figure 3-17 show an audio level of +8dB displayed in the output LEDs on the two different CrossPoint Plus front panels.

							LED key:			= off (value 0 dB),		B = blinking (value 1dB),
				5						= on (value 2dB),		F = flash once
			Press											B
			C									C	B	B
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12
														AUDIO
												CONTROL		I/O
1	2	3	4	5	6	7	8					ENTER PRESET VIEW	ESC	RGBHV AUDIO
			OUTPUTS
								C				Press	F
			+8dB											A
												ESC

Figure 3-16 — Example 8: Viewing the audio level, CrossPoint Plus 84, 88, 124, and 128

				5		LED key:			= off (value 0dB),				B	= blinking,
									= on (value 1dB)
								INPUTS
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
							OUTPUTS
															C

+8dB

B	C
	B
TROL	I/O
VIEW ESC	RGBHV AUDIO

Figure 3-17 — +8dB displayed, CrossPoint Plus 168 and 1616

DPress and release the View () button once to decrease the audio level displayed in the output LEDs by 1dB. Press and release the View () button several more times to decrease the audio level displayed in the output LEDs by an additional 1dB per button push. Note the output LED, View LED, and Esc LED changes that occur each time the View () button is pressed and released. Figure 3-18 and figure 3-19 show the result of pressing the View () button a total of 9 times.

Both figures show an audio level of -1dB. Note that the Esc () LED has turned off and that the View () LED is blinking to indicate a negative level.

3-16 CrossPoint Plus Matrix Switchers • Operation