Matrix Software, cont’d

Executive mode — Allows you to lock out front panel operations, except for the view-only mode functions.

Presets menu — Displays a list of up to 16 presets. You can select a preset from the list to display it in the window.

Go — Activates the selected preset as the current configuration.

Save as — Allows the current set of ties to be saved as a preset. Enter the preset number when prompted to do so.

Changes – Take — Allows you to save to file any changes made to the displayed configuration.

Changes – Cancel — Returns to the previous screen, undoing any changes you have made.

Windows menus

File menu —

Save matrix settings as — Saves a complete set of up to 16 presets, plus the last active setting (preset #0), to a file. Saved settings include audio gain settings (if specified), assigned icons, and icon captions.

Restore matrix settings from — Loads and activates a previously saved setting file.

Save this-session’s settings — Saves the current assigned icons and icon captions.

Restore last-session’s settings — Loads the icons and icon captions that were saved during the last session. If you saved the previous session’s changes to disk the last time you exited the program, the ties from the that session are also loaded.

Select printer — Selects the target printer.

Print tie map — Prints the tie set that is displayed on the screen. Exit — Closes the Extron Matrix Control Program.

Tools menu —

Assign device icons — Displays the complete set of input and output device icons. You can drag any of these icons to the input and output boxes.

Edit device palette — Allows you to add your own device icon graphics.

RGB delay settings — Displays the switching interval setting for each input and allows you to change them.

Audio gain settings — Displays the audio gain level setting for a single input or for all inputs and allows you to change it.

View input frequencies — (DSVP) Displays the input horizontal and vertical frequencies for each input.

Name presets — Allows you to assign a name to each of the 16 memory presets.

Show RS-232 strings — Displays the ASCII commands that are used by the current configuration. You can refer to these for RS-232 programming.

I/O group settings — Allows you to establish I/O groups.

Initialize — Initializes and clears any or all of the following: ties, presets, audio configuration, preset titles, icon names, and icons.

5-4 CrossPoint Plus Matrix Switchers Matrix Software

Page 54
Image 54
Extron electronic HVA, 1616 HV manual Matrix Software, cont’d, Windows menus