Introduction Planning, Room layout | Extron electronic VLM 1000

Introduction — Planning

Before You Begin — Planning the Installation

Before starting installation, you must consider several major factors to ensure that the installation of the VoiceLift

Microphone is as smooth and trouble free as possible, and that the result meets the needs of the users. Placement of the receiver (sensor location) is very important for optimal performance of the VoiceLift Microphone. Because IR technology requires line-of-sight placement, take into consideration anything that could impact or block the transmission of the IR signal from the microphone to the receiver.

The lists on the following pages, though not comprehensive, should be consulted to help ensure that key aspects have been considered.

1.Room layout

The application diagram below shows a typical classroom installation incorporating the VoiceLift Microphone.

VLP 102

Pendant Microphone

PVS 204SA

PoleVault

Switcher

				SI 3C LP	VLR 102
				Plenum Full-Range	Receiver
TCP/IP				Ceiling Speakers
TCP/IP
Network				VLC 102
Network

				Desktop Charging
				Station

Typical classroom installation

NDue to the operating frequencies of the microphone and receiver, lighting fixtures such as fluorescent lights and plasma displays should not affect performance of the system.

1-2 VoiceLift Microphone Installation • Introduction — Planning

Image 4

Extron electronic VLM 1000, VLM 2000 manual Introduction Planning, Room layout, Typical classroom installation

Contents

VoiceLift Microphone Precautions Safety Instructions EnglishConsignes de Sécurité Français Sicherheitsanleitungen Deutsch VoiceLift Microphone installation and wiring overview VoiceLift Microphone Installation Introduction OverviewIntroduction Overview FCC Class B Notice Typical classroom installation VoiceLift Microphone Installation Introduction PlanningIntroduction Planning Room layout Example of a classroom installation Room configurationRoom considerations Introduction Planning, cont’d  The room is larger than 40 by Inventory Introduction Inventory OverviewIncluded items  Bolts for concrete structural ceilings where needed Items not included Installation Overview VoiceLift Microphone Installation Installation Overview Stage 1 Install the VLR 102 Receiver Drop ceiling Stage 3 Configure and Test the SystemJunction box Wall or other hard surface VoiceLift Microphone Installation Installation Stage Installation StageDrop ceiling Junction box Wall or other hard surface Installing the Receiver in a Drop Ceiling Mount the receiver housing to the ceiling tileCut a hole in the ceiling tile Cut a hole in the ceiling tile Attach a conduit to the back plate if needed CAttach a conduit to the back plate if desired Installing the Receiver in a Junction Box Install the junction boxAttach the receiver housing to the junction box Attach a conduit to the junction box if needed Install a raceway if needed Installing the Receiver in a Wall or Other Hard SurfaceMark the mounting screw locations on the surface If not using a raceway Mount the receiver housing to the surfaceIf using a raceway Where it goes Connects to the PVS 204 SA PoleVault switcher Receiver domeVoiceLift Adapter Ethernet cable Pull the cables to the receiver ÇConnect the Ethernet cable to Receiver Out RJ-45 jack Attach the receiver dome to the housing Connect the cables to the receiver Attach the receiver dome to the housing Align the arrows on the housing rim and the dome tab Pull cables to the PoleVault switcher Connect cables to the PoleVault switcherPoleVault switcher Runpole.the cables through the projector Configure the system Set up the microphoneÏSet up the microphone Test the system Finish the installation Adjust the audio levelVoiceLift Microphone Installation Installation Stage 3 Walk around the room to check for sound quality Optional Installation Example Instant Alert Insert the black wire into the Ground portConnect the receiver to the MLC 104 IP Plus Connect the communication cable to an MLC Digital I/O port Configure the MLC 104 IP Plus Using Global Configurator, configure the MLC’sPress and hold both Volume buttons Test the instant alert notification VoiceLift Microphone Installation Reference Information Specifications VLR 102 and VLR 102 SRReference Information General Specifications VLP 102 VoiceLift Microphone Audio/acoustic and electrical Specifications VLC 102 Microphone Charging Station Configure the system. Set up the microphone Test the system. Stage 2 Connect the Receiver to the PoleVault System