Installation — Stage 1, cont’d
4.Mount the receiver housing to the surface.
If not using a raceway:
Mount the receiver housing and base to the surface, using the appropriate screws for the type of surface. (Screws and wall anchors are not included.)
If using a raceway:
a.Position the receiver housing with the raceway inserted through the knockout.
b.Mount the receiver housing and base to the surface, using the appropriate screws for the type of surface. (Screws and wall anchors are not included.)
ÜMount the receiver housing to the mounting surface using screws.
ÁIf using a raceway, insert the raceway through the knockout, then mount the housing.
