Installation — Reference Information, cont’d

Specifications — VLP 102 VoiceLift Microphone

Audio/acoustic and electrical

Microphone type

Omnidirectional electret condenser

Microphone gain

-6 dB to +6 dB, adjustable in 1 dB steps

Audio input

Number/signal type

1 mono, via integrated electret condenser microphone or

 

1 mono, unbalanced, via auxiliary mic input jack with 3.3 VDC plug-in power;

 

and

 

1 stereo, unbalanced, via auxiliary line input jack, mixed with mic input

Connectors

(1) 3.5 mm mini audio jack (tip = left, ring = right, sleeve = GND) for

 

auxiliary line input (Audio In)

 

(1) 2.5 mm mini audio jack (tip = signal + bias voltage, sleeve = GND) for

 

auxiliary mic input (Mic)

IR transmitter (microphone transmission)

Signal type

Infrared output

Carrier frequencies

A and C: 2.3 MHz (selectable)

 

B and D: 2.8 MHz (selectable)

Operating range

40' (12.2 m) line of sight

Transmission angles

150° horizontally and 90° vertically

General

Power

Supplied by an internal battery

Charger requirements

+5 VDC, 0.5 A on a 3.5 mm o.d. DC power jack, center pin positive

Batteries

 

Number/type

1 AA size NiMH or alkaline battery

Operating time (h:mm)

Rechargeable 2700 mAh NiMH batteries: up to 8 hours, continuous use

 

Alkaline batteries: up to 8 hours, continuous use

Recharging time

6 hours for a 2700 mAh NiMH battery

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

 

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Mounting

Can be used as a pendant with the included lanyard.

Enclosure type

High impact plastic

Enclosure dimensions

4.7" H x 1.4" W x 1.1" D*

 

(12.0 cm H x 3.5 cm W x 2.9 cm D*)

 

(*Depth includes clip. Depth without clip = 0.9" [2.3 cm])

Product weight

1.7 oz (50 g) without battery

 

2.6 oz (75 g) with battery

Shipping weight

1 lb (<1 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

 

Environmental

Complies with the appropriate requirements of RoHS and WEEE.

Accessibility

Section 508 of the Rehabilitation Act (29 U.S.C. 794d)

MTBF

30,000 hours

Warranty

3 years parts and labor

NAll nominal levels are at ±10%.

NSpecifications are subject to change without notice.

2-20 VoiceLift Microphone Installation • Reference Information

Page 28
Image 28
Extron electronic VLM 1000, VLM 2000 manual Specifications VLP 102 VoiceLift Microphone, Audio/acoustic and electrical