Fisher MPX-CD163, MPX-CD93 – 37 –, CLOCK SET-3, Example2: Set the timer operation as follows, setting), (TIMER-Bsetting), buttons to set “A”, Press the BACK button

CLOCK SET-3

CLOCK SET SETTINGS

5

– +

6

– +

7

– +

8

– +

Use the cursor button to select TIMER-A “T-1 :00” (minutes), and then use the setting buttons to set the minutes to “00”.

	(TIMER	SET)
TIMER-A		TIMER-B
T-1	04:00	T-1	00:00
T-2	00:00	T-2	00:00
T-3	00:00	T-3	00:00
T-4	00:00	T-4	00:00

Use the cursor button to select TIMER-A “T-2 00:” (hours), and then use the setting buttons to set the hours to “6”.

	(TIMER	SET)
TIMER-A		TIMER-B
T-1	04:00	T-1	00:00
T-2	06:00	T-2	00:00
T-3	00:00	T-3	00:00
T-4	00:00	T-4	00:00

Use the cursor button to select TIMER-A “T-2 00” (minutes), and then use the setting buttons to set the minutes to “30”.

	(TIMER	SET)
TIMER-A		TIMER-B
T-1	04:00	T-1	00:00
T-2	06:30	T-2	00:00
T-3	00:00	T-3	00:00
T-4	00:00	T-4	00:00

Repeat steps 4 and 5 to set the hours and minutes for T-3 and T-4 also.Use the same procedure to set the hours and minutes for T-1, T-2, T-3 and T-4.

	(TIMER	SET)
TIMER-A		TIMER-B
T-1	04:00	T-1	06:00
T-2	06:30	T-2	08:00
T-3	12:30	T-3	14:30
T-4	18:00	T-4	20:00

Example2: Set the timer operation as follows

☞To set TIMER-A time zones to automatic switching screen and monitor mask.

☞To set TIMER-B timer zones to program recording and motion sensor.

1		Use the cursor button to select
	+	SEQUENCE “A”, and then use the
–		setting buttons to set “A”. (TIMER-A
		setting)
		SEQUENCE	A
		PROGRAM REC	A
		MASK	A
		MOTION SENSOR	A
2		Use the cursor button to select
	+	PROGRAM REC “A”, and then use
–		the setting buttons to set “B”.
		(TIMER-B setting)
		SEQUENCE	A
		PROGRAM REC	B
		MASK	A
		MOTION SENSOR	A

Use the cursor button to select

3 – + MASK “A”, and then use the settingbuttons to set “A”.

	SEQUENCE	A
	PROGRAM REC	B
	MASK	A
	MOTION SENSOR	A
4	Use the cursor button to select
	MOTION SENSOR “A”, and then
– +
	use the setting buttons to set “B”.
	SEQUENCE	A
	PROGRAM REC	B
	MASK	A
	MOTION SENSOR	A

Note:	5	BACK
• Initial settings T-1 to T-4 are “00:00”
In this case, the timer will operate at all times set by T-1.

•The time divisions of the timer settings (T-1 to T-4) are continuous settings in one cycle from start time to end time. For instance, in the case of T-1 (4:00) and T-2 (6:30), the domain of timer T-1 is from 4 a.m. until 6:30 a.m.

•If two more timers are set to the same starting time, the timers will operate together for the same period of time.

•When setting the timers, a setting cannot be entered if, for instance, T-3 as been set to earlier than T-1. If this happens, re-enter the correct settings.

Press the BACK button.

The setting will then be completed and the display will return to the CLOCK SET screen.

Press the BACK button once more to return to the MAIN MENU screen.

English – 37 –