Fisher MPX-CD163, MPX-CD93 CAMERA CONTROL setting, – 73 –, CONTROL SET-1, “SANYO”, and, (example: 001), buttons of this unit, dome-typecamera that is, connected (example: 01)

CONTROL SET-1

CAMERA CONTROL setting			☞✴❏ ❃❏■▼❒❏● ▼❈❅ ❄❏❍❅✍▼❙
This describes the settings and methods of operation when				❆❒❏❍ ▼❈❅ ▲❙▲▼❅❍ ❃❏■▼❒❏
connecting a dome-type camera for which the power and signal				▼❈❉▲ ◆■❉▼✎
can be controlled through a coaxial cable to the camera video
input connector.			1		✵▲❅ ▼❈❅ ❃◆❒▲❏❒ ❂◆▼▼❏■ ▼
The two methods of operation are: direct control using the				NEXT	✣✡✭✥✲✡ ✣✯✮✴✲✯✬“SANYO”, and
control buttons on this unit and operation from the system					then press the NEXT button.
controller (using the RS-485 connector).					The CAMERA CONTROL SET screen will
					be displayed.
☞✴❏ ❃❏■▼❒❏● ❁ ❄❏❍❅✍▼❙❐❅ ❃❁❍❅❒❁ ◗❉▼❈
	▼❈❉▲ ◆■❉▼				(CONTROL SET)
					DATA SPEED	19200
					ALARM SEND	OFF
		✰❒❅▲▲ ▼❈❅ ✬✩✶✥ ❂◆▼▼❏■✎			RS232C/RS485	RS232C
1
					CAMERA CONTROL	SANYO *
	✬✩✶✥	✴❏ ❄❉▲❐●❁❙ ◗❉●● ❒❅▼◆❒■ ▼❏ ▼❈❅ ■❏❒❍❁● ▲❃❒❅❅■✎

(*:NEXT)

Display examples:

•ΣΑΝΨΟ:Σελεχτ ωηεν α χοαξιαλ χαβλε χα∝ερα βψ Σανψο ισ χοννεχτεδ.

		• ΟΤΗΕΡ:Σελεχτ ωηεν α χοαξιαλ χαβλε χα∝ερα
2		✰❒❅▲▲ ▼❈❅ ❃❁❍❅❒❁ ▲❅●❅❃▼ ❂◆▼▼❏■
		βψ σο∝ε οτηερ ∝ανυφαχτυρερ ισ χοννεχτεδ.
	2	✈❅❘❁❍❐●❅✚ ✒✉ ❆❏❒ ▼❈❅ ❃❏■■❅❃▼❅❄
		❄❏❍❅✍▼❙❐❅ ❃❁❍❅❒❁✎
			Υσε τηε χυρσορ βυττονσ το σ
		✴❈❅ ❍❁❉■ ❍❏■❉▼❏❒ ❏❒ ▲❐❏▼ ❍❏■❉▼❏❒ ◗❉●●
		❃❈❁■❇❅ ▼❏ ❁ ▲❉■❇●❅✍▲❃❒❅❅■2	❄❉▲❐●❁❙✎
			“OFF” for the number of a

dome-type camera that is

✮❏▼❅✚✳▼❉●● ❉❍❁❇❅✌ ❚❏❏❍ ❁■❄ ❁◆▼❏❍❁▼❉❃ ▲❃❒❅❅■ ▲◗❉▼❃❈❉■❇connected (example: 01). ❏❐❅❒❁▼❉❏■▲ ❁❒❅ ■❏▼ ❁❖❁❉●❁❂●❅ ❆❏❒ ▲❉❇■❁●✍▲❃❒❅❅■ ❄❉▲❐●❁❙ ❏■

	(CAMERA CONTROL SET)
▼❈❅ ❍❁❉■ ❍❏■❉▼❏❒ ◗❈❉●❅ ▼❈❅ ❄❏❍❅✍▼❙❐❅ ❃❁❍❅❒❁ ❉❍❁❇❅ ❉▲
❂❅❉■❇ ❖❉❅◗❅❄✎	IN	IN
	01:OFF	09:OFF
	02:OFF	10:OFF
	03:OFF	11:OFF
3 To control the dome-type camera with the various	04:OFF	12:OFF
	05:OFF	13:OFF
	06:OFF	14:OFF
	07:OFF	15:OFF
buttons of this unit	08:OFF	16:OFF

1 Cursor buttons: Enable pan and tilt operations

2 Setting buttons: Zoom in (+), zoom out ( –)

3 Next screen button: Enables one-touch auto focus

2While viewing, if you press and hold down the

camera select button for about two seconds, the indicator will flash and the following camera adjustments will be enabled.

Note: If you leave the indicator flashing, the ability to make camera adjustments will be canceled after about ten seconds. For making adjustments, press the camera select button once more.

4 Cursor button (→): Οπεν ιρισ

Χυρσορ βυττον←):Χλοσε( ιρισ

5 Σεττινγ βυττον (+): Μανυαλ φοχυσ Σεττινγ βυττον–): Manual focus(

31 4

3		Press the setting button and use
	– 9	the setting buttons once more to
		enter the address of the camera
		(example: 001).
		(CAMERA CONTROL SET)
		IN	IN
		01:001	09:OFF
		02:OFF	10:OFF
		03:OFF	11:OFF
		04:OFF	12:OFF
		05:OFF	13:OFF
		06:OFF	14:OFF
		07:OFF	15:OFF
		08:OFF	16:OFF

Note:

•Εντερ τηε ΡΣ−485 χοντρολ αδδρεσσ φορ α δ τηατ ισ χοννεχτεδ το τηισ υνιτ.

•Ωηεν ψου πρεσσ τηε σεττινγ βυττον, ΟΦΦ ω ανδ ψου χαν τηεν εντερ τηε αδδρεσσ.

•Αδδρεσσεσ φρο∝ 000 το 127 χαν βε εντερεδ βε ινχρε∝εντεδ βψ πρεσσινγ τηε + σεττινγ δεχρε∝εντεδ βψ πρεσσινγ– setting buttonτηε.

4		Press the MENU button.
	MENU	This completes the settings. Use the
		control buttons in the system controller
		“MULTIPLEXER” operating domain for
		controlling the dome-type cameras.

English		– 73 –
	2 5