Fisher MPX-CD163, MPX-CD93 – 55 –, VCRKSET-3, then press the setting buttons, Use the cursor button to select, REC. PICTURE (example: 01), and, Use the cursor button to select SW

VCRKSET-3

VCR SET SETTINGS

Use the cursor button to select SW.6 – + IN EDGE (example: ↓), ανδ τηεν πρεσσ τηε σεττινγ βυττονσ.

(VCR SET)

RECORDER TLS

REC.SPEED 2 H

ALARM REC.SPEED 2 H

SW.IN EDGE	ñ
REC.PICTURE	01
PROGRAM REC.	OFF

Δισπλαψ εξα∝πλεσ:

•↑: Switch timing on rising edge of SW signal

•↓: Switch timing on falling edge of SW signal

•↑↓: Switch timing on both rising and falling edges of SW signal

7	Use the cursor button to select
	REC. PICTURE (example: 01), and
– +
	then press the setting buttons.
	(VCR SET)
	RECORDER	TLS
	REC.SPEED	2	H
	ALARM REC.SPEED	2	H
	SW.IN EDGE	ñ
	REC.PICTURE	01
	PROGRAM REC.	OFF

•This sets how many copies of the image from the various cameras are recorded when they are output from the VCR OUT connector. When this setting is made, it eliminates the cross talk that can occur when the camera images are recorded.

•The same image can be recorded continuously up to a maximum of 99 times.

•Even if this setting is set to 1, the PROGRAM REC. and ACTIVE REC. settings may prevent recording of images one at a time.

English – 55 –