Fisher MPX-CD163, MPX-CD93 – 68 –, ALARM SET-8, VIDEO LOSS setting (default setting: OFF), “TEST”, buttons, “OFF”, and, “T-1”,and then, “MODE”, and then, Press the MENU button

ALARM SET-8

ALARM SET SETTINGS

6		Use the cursor button to move the
	+	cursor to the middle of the screen,
–		and then press the setting buttons
		so that “A” is displayed.
		Set so that“A” is displayed in the middle of
		the screen.
		------
		----
		--

VIDEO LOSS setting (default setting: OFF)

If the camera image disappears because of a sudden accident or some other reason (so that image input stops), this sets whether the image that appeared immediately before the signal was lost is displayed as a still image or whether a test pattern is displayed.

A

CAMERA NO.05 T-1 LEVEL:OFF MODE:A

7	Use the cursor button to select	“T-1”, and then
	press the setting buttons to select “T-2”.
	CAMERA NO.05 T-2 LEVEL:OFF MODE:A			2
8	Use the cursor button to select LEVEL		“OFF”, and
	then specify a sensitivity of “2” with the setting
	buttons.
	CAMERA NO.05 T-2 LEVEL:2		MODE:A	2
9	Use the cursor button to select	“MODE”, and then
	press the setting buttons to select “A”.
	CAMERA NO.05 T-2 LEVEL:2		MODE:A	2

Example: To set a test pattern for the image when there is a VIDEO LOSS

1 Press the MENU button, use the cursor button to select “ALARM SET” and then press the NEXT button.

The ALARM SET screen will be displayed.

2		Use the cursor button to select
	– +	VIDEO LOSS “OFF”, and then use
		the setting buttons to change to
		“TEST”.
		(ALARM SET)
		ALARM	OFF
		ACTIVE REC.	OFF
		MOTION SENSOR	OFF
		VIDEO LOSS	TEST

Display examples:

•ΟΦΦ:Ωηεν τηε ϖιδεο σιγναλ ισ λοστ, α βλα δισπλαψεδ.

•ΦΡΕΕΖΕ:Τηε ι∝αγε δισπλαψεδ ι∝∝εδιατελψ βε σιγναλ ωασ λοστ ισ δισπλαψεδ ασ α στιλλ

•ΤΕΣΤ:Ωηεν τηε ϖιδεο σιγναλ ισ λοστ, α τεσ δισπλαψεδ.

10

MENU

Press the MENU button.

•Νοτε:

Τηισ χο∝πλετεσ τηε σεττινγ. Τηε δισπλαψ

ωιλλ ρετυρν το τηε χα∝ερα •ι∝αγεΙφ νο σχρεενχα∝ερασ. αρε“NOχοννεχτεδ,VIDEO” is displayed.

•Ωηεν αν ιντρυδερ χο∝εσ ιντοIn τηεthis case,∝ιδδλεthe video loss operation does not occur. οφ τηε χα∝ερα 5 ι∝αγε, αν αλαρ∝However,ωιλλif the powerβε is turned off when a video signal is

γενερατεδ.	being input, the condition immediately before the video signal
	was lost is detected and video loss operation occurs.
	• Α στιλλ ι∝αγε ορ α τεστ παττερν ισ δισπλ
	οπερατιον, βυτ τηε ρεχορδινγ δεϖιχε ωιλλ
	υντιλ τηε αλαρ∝ ισ ρεσετ ορ τηε ι∝αγε ρε
	• Εϖεν ιφ α στιλλ ι∝αγε ισ σετ το βε δισπλ
	οπερατιον, α τεστ παττερν ωιλλ αππεαρ ιφ
	ορ αυτο∝ατιχ σωιτχηινγ δισπλαψ ηασ βεεν

3		Πρεσσ τηε ΜΕΝΥ βυττον.
	MENU

– 68 – English