Fisher MPX-CD163, MPX-CD93 MOTION SENSOR setting (default setting: OFF), – 67 –, ALARM SET-7

ALARM SET-7

ALARM SET SETTINGS

MOTION SENSOR setting (default setting: OFF)

To display motion sensors on each camera image and make settings for intruder detection. The motion sensors work as shown below.

1 2 2

----------------

----------------

----------------

----------------

----------------

----AAAA--------

----------------

----------------

------------BBBB

----------------

CAMERA NO.01T-1LEVEL:OFF MODE:A

3 4 5 6

1Motion sensor off status

When the cursor button is pressed, the cursor moves.

2Sensor setting

When the setting buttons are pressed, the setting changes to “A”, “B” or “–”.

Set to “A” or “B” in accordance with the desired sensor detection position.

3Camera display

When the camera select button is pressed, the camera number changes. Use the camera select button to select cameras that are set for motion sensor alarms.

Example: To3record3images3detected3by motion3sensor3for3the3timer setting3duration

1 Set the TIMER setting in the CLOCK SET menu to “ON”, make the settings for TIMER-A and TIMER-B in the TIMER SET menu, and then select MOTION SENSOR and close the CLOCK SET screen.

Press the MENU button.

2	MENU	The MAIN MENU screen will be displayed.
			(MAIN MENU)
		1	LANGUAGE	¤
		2	CLOCK SET	¤
		3	DISPLAY SET	¤
		4	VCR SET	¤
		5	ALARM SET	¤
		6	SECURITY SET	¤
		7	CONTROL SET	¤
		8	ALARM DATA	¤
			(*:NEXT)
3		Use the cursor button to select
	NEXT	“ALARM SET” and then press the
		NEXT button.

The ALARM SET screen will be displayed.

(ALARM SET)

ALARM	OFF
ACTIVE REC.	OFF
MOTION SENSOR	OFF
VIDEO LOSS	OFF

4Setting motion sensor operating times

Use timer settings to select specified time zones (T-1 to 4).

This will enable an alarm to be detected by motion sensors 4 with specified sensitivities only in the selected time zones

(See page 36).

5Motion sensor sensitivity setting

•This sets the sensor sensitivity.

1, 2, 3, 4 ... (the higher the number, the lower the		– + NEXT
sensitivity), OFF
6Motion sensor detection setting
• Α:A motion sensor alarm is generated when a moving
object is detected at A.
• Α ΑΝΔ Β:When an object is detected touching both
sensors at point A and point B, a motion sensor alarm will
be triggered.
• Α ΑΝΔ ΝΒ:With point A aligned on an important item	5
(object) and point B aligned on a non-moving object, a
motion sensor alarm will be triggered when the object at	5
point A is detected, without reacting to changes such as
the brightness of the whole screen.

•Β ΤΟ Α:A motion sensor alarm will be triggered if there is any change in the movement of a subject passing from point A to point B.

•Χ:A motion sensor alarm is generated when the whole screen area changes uniformly. This results in a reaction at times such as when the camera is sprayed with something. (Sensor settings are not required.)

Use the cursor button to select MOTION SENSOR “OFF”, press the setting buttons to change the setting to “ON”, and then press the NEXT button.

The motion sensor alarm setting screen will be displayed.

(ALARM SET)
ALARM	OFF
ACTIVE REC.	OFF
MOTION SENSOR	ON	*
VIDEO LOSS	OFF
(*:NEXT)

Press camera select button 5.

The image from camera 5 appears and T-1 flashes.

----------------

----------------

----------------

----------------

----------------

----------------

----------------

----------------

----------------

----------------

CAMERA NO.05 T-1 LEVEL:OFF MODE:A

English – 67 –