SPECIFICATIONS

Signal format

Camera signal input synchronization Camera video input connectors

Camera video output connectors VCR input connector

Composite input

S-Video input connector

Digital input connector VCR output connector

Composite output

S-Video output connector

Digital input connector

Main monitor output connector

(MAIN MONITOR)

S-Video output connector

Spot monitor output connectors (SPOT MONITOR 1 - 4)

Control connector

Remote control input (R1, R2)

Alarm output (AL)

Switch input (SW)

Alarm input connectors Sensor alarm output connector RS-485 control connector RS-232C connector

Automatic screen switching timing Monitor on-screen display

Menu settings

:Based on NTSC color signal standard

:Asynchronous

:VS/VBS, 1.0 Vp-p/75 , BNC connector x 16 Control signal superimposed when camera operating (MPX-CD93: BNC connector x9)

:Throughput of each input, 1.0 Vp-p/75 , BNC connector x 16 (MPX-CD93: BNC connector x9)

:VS/VBS, 1.0 Vp-p/75 , BNC connector x 1

:Separate YC signals, DIN connector (S terminal) x 1

Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced

:RJ-45 x 1

:VS/VBS, 1.0 Vp-p/75 , BNC connector x 1

:Separate YC signals, DIN connector (S terminal) x 1

Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced

:RJ-45 x 1

:VS/VBS, 1.0 Vp-p/75 , BNC connector x 1

Camera live image or VCR playback image output: single-screen, automatic switching image, multiple-screen

:Separate YC signals, DIN connector (S terminal) x 1

Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced

:VS/VBS, 1.0 Vp-p/75 , BNC connector x 4

Camera live image: single-screen (Same image as main monitor selectable using menu/SPOT MONITOR 1 only)

:2-wire type with resistance-based identification system

:5 V DC, 5.7 k(Low output)

:Low input, for input signal from SW OUT of timelapse VCR/real time VCR (as per this manufacturer specifications)

:No voltage, make-contact switch input x 16 (Low input) (MPX-CD93: BNC connector x9)

:Alarm output x 16 (low output, normally open) (MPX-CD93: BNC connector x9)

:RJ-11 type: 2 connectors (A/B), Push-lock type: 3 connectors (A, B, Ground)

:9-pin D-SUB

:Available in single-screen and quad mode, with interval selectable from 1 – 30 sec.

:Title (up to 10 characters), date, time selectable

: 8 menus

: 300 mA (18 W)

Operating environment temperature

: 5 to 40°C

Operating environment humidity

: 10 to 80%

Dimensions

:

420 (W) x 86 (H) x 360 (D) mm

Weight

:

Approx. 5 kg

Products are subject to change in design and specifications without notice and without incurring any obligation.

– 80 –

English