FOCUS Enhancements FS-3 manual Mounting to a Camcorder, Mounting to NP Battery Equipped Camcorders

FireStore FS-3 User Guide

MOUNTING TO A CAMCORDER

The FireStore FS-3 is designed to mount directly to full size DV camcorders. FireStore FS-3 features either Anton/Bauer, V-Mount, PAG Lock or NP mount plates allowing quick connection to most camcorders featuring these battery systems.

Mounting to Anton/Bauer, V-Mount or PAG- Lock Equipped Camcorders

To mount to camcorder's featuring either an Anton/Bauer, V-Mount or PAG Lock battery system, do the following:

1)Remove any connected battery from the camcorder's battery mount plate.

2)Connect the FS-3 unit to the battery mount plate on the rear of the camcorder.

3) Attach the battery to the rear of the FS-3 unit.

Mounting to NP Battery Equipped Camcorders

To mount to camcorder's featuring NP battery systems, do the following:

1)Remove and disconnect the attached battery system from the camcorder. Consult either your camcorder's documentation or documentation from your battery system for more detailed information on removing the battery system. Leave any existing rubber gasket between the camcorder and battery system in place.

2)Mount the NP adapter plate to the rear of the camcorder with the supplied four screws (the plate mounts to the rear of the camcorder utilizing the same mount holes the NP battery case mounts to).

PAGE 9